Server 301/302 Configuration Causes TOO_MANY

301 and 302 redirects are common jumps for websites, but improper configuration can lead to "TOO_MANY_REDIRECTS" error that prevents the web page from opening. This article will help you quickly identify the cause of the problem and provide a solution to get your website back to normal access.

I. Definition of TOO_MANY_REDIRECTS error

TOO_MANY_REDIRECTS The error usually indicates that the browser was unable to load the page successfully because the page entered a dead end loop, repeating the redirection operation. The site jumps from one URL to another and then back to the original URL, causing the browser to fail to finish loading.

For example, a page on a particular website jumps from HTTP to HTTPS and back to HTTP again, creating an infinite loop.

II. Causes of TOO_MANY_REDIRECTS errors

301/302 redirect misconfiguration
For example, HTTP redirects to HTTPS, which redirects back to HTTP, causing a loop.

HTTP and HTTPS configuration conflicts
SSL configuration is incomplete, correct redirection rules are not set, and HTTP and HTTPS are bouncing around.

browser (software)Caching issues
The cache saved the old redirection rules, causing the loop to occur even though the configuration had been updated.

Inconsistent WordPress address settings
WordPress address and site address protocols do not match (HTTP vs. HTTPS), causing redirection conflicts.

How to solve the TOO_MANY_REDIRECTS error caused by server 301/302 configuration?

1. Checking and fixing 301/302 redirect configurations

First, make sure you don't have conflicting 301 or 302 redirect rules in your server or site configuration. Check the location below:

.htaccess file: This is the most common place to configure redirects. Make sure there are no redundant redirection rules, especially if you have problems looping between HTTP and HTTPS.

# Force all HTTP requests to be redirected to HTTPS
RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

Nginx Configuration File: If you are using a Nginx server, make sure that the HTTP to HTTPS redirection rules are set correctly in the Nginx configuration file.

server {
    listen 80; server_name yourdomain.com; server_name yourdomain.com
    server_name yourdomain.com; return 301 ;
    return 301 https://$server_name$request_uri;
}

2. Clear browser cache and Cloudflare (computing) cache

Sometimes, old redirection rules in the browser cache can cause problems. Clearing your browser cache or visiting the site in no-trace mode can rule out this problem.

If you are using Cloudflare or another CDN service, make sure you also remove the CDN cache to avoid problems caused by caching of old redirection rules.

Operational Steps:

Clear your browser cache and cookies.

To clear the Cloudflare cache: Log in to the Cloudflare control panel and go to the (computing) cache section, click on the clear the cacheThe

3. Ensure HTTP and HTTPS configurations are consistent

If you have SSL/HTTPS enabled on your site, make sure that all relevant URLs are configured consistently. In the WordPress backend, check the following settings:

assure WordPress Address (URL) respond in singing Site address (URL) It's all in the form of https:// Beginning.

If your WordPress address is HTTP and the site address is HTTPS, uniformly change it to HTTPS.

4. Managing Redirects with the WordPress Plugin

If unfamiliar with manual editing .htaccess or server configuration, you can use plugins to manage redirects. For example.Redirection The plugin helps you manage URL redirects and prevent conflicts.

5. Checking SSL Certificates

If the SSL certificate is not properly installed or configured, it may also cause a redirection loop. Using a tool such as SSL Labs to check if the SSL configuration is working properly. Make sure you are using a valid SSL certificate for your domain name.

IV. Summary and recommendations

TOO_MANY_REDIRECTS The error is usually caused by improperly configured 301/302 redirects on the server or conflicting redirects for HTTP and HTTPS. This problem can be effectively resolved by following the steps below:

Check and fix the 301/302 redirection configuration to ensure that the redirection rules are consistent between HTTP and HTTPS.
Clear your browser cache and Cloudflare cache to ensure that old redirection rules do not interfere with the new settings.
Ensure that WordPress URLs are configured consistently to use HTTPS.
Use plugins to manage redirects and simplify operations.
Ensure that the SSL certificate is properly configured.

With these operations, it is possible to avoid TOO_MANY_REDIRECTS errors to ensure proper website access and a smooth user experience.

Contact Us
Can't read the tutorial? Contact us for a free answer! Free help for personal, small business sites!	Customer Service
① Tel: 020-2206-9892
② QQ咨询：1025174874
(iii) E-mail: info@361sale.com
④ Working hours: Monday to Friday, 9:30-18:30, holidays off