How to fix Elementor won't load error

With Elementor, you can replace the block editor with a more intuitive page builder. If you are an Elementor user, you need to load the editor every time you create or edit a page. However, sometimes Elementor may not load due to an error.There are several ways to fix this problem. If you understand the cause of the error, you can troubleshoot it quickly.

Why is Elementor not loading?

Before we get into the specifics of the problems Elementor can cause, it's important to understand what the "Unable to load" error means. This error occurs when you launch the Elementor editor.

Typically, the editor only takes a moment to load:

However, if the editor is stuck on the loading screen, there may be an error. This is not the same as the editor failing to load at all or an HTTP code appearing. In this case, the site should be running normally, except for the fact that Elementor is not loading.

Often, Elementor may not load because your server cannot fulfill the plugin's requirements. The plugin you are using may also cause compatibility issues with Elementor. In the next few sections, we'll outline Elementor's requirements and show you how to troubleshoot incompatibility issues.

What are Elementor's requirements?

Each plugin has its own system requirements. Most plugin developers do not publish this information.

Some plugins, such as page builders and security tools, tend to have specific system requirements. In the case of Elementor, these are the minimum requirements (excluding storage space):

• WordPress 5.2 or later
• PHP 7 or later
• MySQL 5.6 or later
• WordPress memory limit of at least 128 MB

In most cases, plugins can be installed even if the server does not meet the plugin requirements. However, this may result in the plugin not working properly, and in the case of Elementor, may result in the editor not being loaded.

How to fix Elementor not loading (5 ways)

If Elementor gets stuck on the loading screen, the first thing to do is to reload the page. Try accessing the Elementor editor again and see if the error persists. If it persists, it's time to troubleshoot.

1.Update Elementor

The reason why Elementor is not loading may be that an outdated version of the plugin is being used. Outdated plugins may conflict with other tools or the latest version of WordPress.

To check if Elementor is the latest version, go to "plug-in (software component)">"Installed plug-ins", look for the page builder. If pro is turned on, you should be able to see it in the list of plugins Elementor respond in singing Elementor Pro::

If you see a notification about an updated version of Elementor, you need to update. Then, try accessing the editor again.

2. Checking for plugin conflicts (and testing Elementor add-ons)

It is not uncommon for plugins to conflict with each other. This often happens when multiple plugins provide overlapping functionality or conflicting code. The best thing to do is to test plugins one by one to see if any of them are causing Elementor to fail to load. Ideally, this can be tested using a staging site, as disabling critical plugins can affect site functionality.

First, go to "Plugin">"Installed plug-ins". Then, disable them one by one in the list of active plugins. After disabling each plugin, try reloading the Elementor editor to see if it works. Special attention also needs to be paid to Elementor add-ons. These plugins extend the functionality of the Page Builder and the widget library:

If disabling a specific plugin or add-on has no effect when loading the Elementor editor, you can go ahead and reactivate it. The purpose of this is to test plugins one by one to see if any of them are causing compatibility issues.

Another approach is to disable all plugins at once (except Elementor) and see if the editor works. However, we recommend against this method unless using an experimental site. Most WordPress sites rely on plugins for key functionality, so disabling all plugins at once may affect the user experience.

3. Check the PHP version of the website

Elementor only supports PHP 7 and later. The current version of PHP can be viewed through the WordPress admin. Go to "artifact">"Site operation", select "text " tab. Here you can find some technical information about your website. Open the "server (computer) " tab, you will be able to view the version of PHP used by the server:

Ideally, you will see PHP 7 or 8.

4. Check the memory limit of your website

The site's PHP memory limit defines how much memory is available for the entire WordPress installation. A memory limit that is too low can prevent many plugins from working properly. As we mentioned before, the minimum system requirement for Elementor is 128 MB of RAM. If you're not sure what your site's memory limit is, you can set it by going to the"Tools" > "Site Operational Status"and select"Information"tab to check. Then, open theserver (computer)tab and view thePHP Memory LimitEntry:

Most modern web hosts will offer 128-256 MB as a benchmark for PHP memory limit. If you are dealing with a smaller number, you can try to increase the PHP memory limit manually. The easiest way to do this is via FTP.

First connect to your site via FTP or SFTP and find the WordPressradical (chemistry)folder. This is usually namedwww, publicmaybepublic_html. Once you have found the folder, open it and look forwp-config.phpDocumentation:

Open with a text editorwp-config.phpfile and look for the following line:

define( 'WP_MEMORY_LIMIT', '256M' );

Depending on the server's memory limitations, this number may be lower. If you can't find this line, you can add it manually. However, make sure not to edit the wp-config.php any other entries in the file. You will also need to add this code before the line below:

/* That's it, stop editing! Happy blogging. */

Technically, you can limit your memory to less than 256 MB, or you can try to set a larger memory limit. However, in our experience, 256 MB is the optimal value for PHP memory. When you're done, save the changes and close the file. Now, check the Site Performance page again to see if WordPress recognizes the change in PHP memory limit.

5. Toggle the Elementor's Loader method.

Elementor has a built-in feature to change the way the plugin loads the editor. Changing the Elementor loader method won't affect you in any way, but we recommend using it as a last resort if no other troubleshooting method is available.

To change the Elementor loading method, go to Elementor > set up > high level. Then, look for the "Switch Editor Loader Method" setting and select "Enable":

Other Elementor Troubleshooting

If you encounter any technical issues while using Elementor and are unsure how to proceed, there are a number of other troubleshooting methods available. Let's take a look.

Switching Topics

Most of the popular WordPress themes have been tested with the main Page Builder plugin. However, we recommend that you check the description of each theme to make sure it mentions compatibility with Elementor.

If your current theme is not compatible with Elementor, updating the theme may solve the problems encountered when using the page builder. Anyway, it only takes a minute to change the theme, so give it a try if you're experiencing problems with Elementor.

Disable browser add-ons

In some cases, browser add-ons can cause page-by-page errors. For example, add-ons that block scripts may be used, or extensions that add custom code to a specific website.

Some of these add-ons may cause problems when trying to use Elementor. A quick way to check if this is the case is to try using Elementor with a clean browser installation. if the error goes away, you need to find out which browser extension is causing the problem. This means disabling extensions one by one until the problematic extension is identified.

summarize

If you use Elementor to build and update your website, then the editor not loading can seriously affect your progress. There are a variety of reasons why the editor won't load, but it's usually related to system requirements or plugin compatibility issues.

Contact Us
Can't read the tutorial? Contact us for a free answer! Free help for personal, small business sites!	Customer Service
① Tel: 020-2206-9892
② QQ咨询：1025174874
(iii) E-mail: [email protected]
④ Working hours: Monday to Friday, 9:30-18:30, holidays off